RaceAmerica 5843 Wireless Speed Trap PRODUCT OVERVIEW Connection Type RJ-45 Modular Max Operating Range -20ºF to 120ºF (Display) The Wireless Speed Trap replaces track cables 0ºF to 120ºF (T-Link2) normally used to connect track sensors to the Battery Life 24 hours timing system.
RaceAmerica 5843 Wireless Speed Trap SPEED TRAP SETUP NOTE: It is very important to set-up the speed trap electronics at exactly the designated spacing Each Speed Trap T-Link3 unit is configured and in a perfect rectangle to make sure optimal with a unique ID code and a wireless optimizer accuracy will be attained.
RaceAmerica 5843 Wireless Speed Trap TYPICAL SPEED TRAP SETUP Model 5843 Wireless Speed Trap can be operated with either a Large Display or a PC or both. For initial alignment, start with both beams out of alignment (LED ON). The LED will go DIP SWITCH DEFINITIONS out when the speed or finish beam is in alignment;...
RaceAmerica 5843 Wireless Speed Trap U P S E L F-T E S T, T H E D I S P L Ay W I L L Display Hold Time CONTINUOUSLy LOOP ON THE SELF- 15 seconds TEST UNTIL SWITCH NUMBER 1 IS SET 30 seconds TO THE ‘ON’...
RaceAmerica 5843 Wireless Speed Trap OPERATION When the speed trap is set up and aligned with either a Large Display or PC to capture data, it is time to make a pass. The vehicle can pass through the speed trap in either direction. As the vehicle breaks the first beam, a ‘_’...
BATTERY CHARGE SUPPORT AGREEMENTS Charge the batteries using the charging Support agreements are available from cable provided by RaceAmerica. All functional RaceAmerica providing Telephone Assistance on electronics are disabled during battery recharge technical issues and operational questions, repair to avoid damage. Typically battery charging will...