To the original purchaser of this RaceAmerica product, RaceAmerica warrants it to be in good work- ing order for a period of ninety (90) days from the date of purchase from RaceAmerica or an authorized RaceAmerica distributor. Should this product malfunction during the warranty period, RaceAmerica will, at its option, repair or replace it at no charge, provided the product has not been subjected to mis- use, abuse, or alterations, modifications, and/or repairs not authorized by RaceAmerica.
RaceAmerica 5830 Wireless Speed Trap SPEED TRAP SETUP NOTE: It is very important to set-up the speed trap electronics at exactly the designated spacing Each Speed Trap T-Link unit is configured and in a perfect rectangle to make sure optimal with a unique ID code and a wireless optimizer accuracy will be attained.
RaceAmerica 5830 Wireless Speed Trap TYPICAL SPEED TRAP SETUP 45232B or Model 5830C Wireless Speed Trap can be operated with either a Large Display or a PC or both. 15/24 inch models are only five digits. The wireless speed trap requires either a digital...
RaceAmerica 5830 Wireless Speed Trap Display as Master or Slave The Display also has two diagnostic modes. Switch number 3 determines whether the Alignment Mode - set DIP switches 1,4, 5 & 6 to 6X30DW is used in conjunction with a PC. When using the Display without a PC, it functions as the OFF position;...
RaceAmerica 5830 Wireless Speed Trap and third digits The system allows four seconds (4 sec) to <id> is the ID code of the T-Link - A thru G and complete the pass before resetting; if both beams Z are valid have not been broken, the dash will disappear after <timestamp>...
RaceAmerica 5830 Wireless Speed Trap SPARE PARTS Further to minimize race program interruptions, RaceAmerica recommends some spare parts. A spare emitter/sensor pair should be available in the event of an unfortunate accident during a program. Contact RaceAmerica for availability and pricing of spares items.
Page 10
RaceAmerica 5830 Wireless Speed Trap DISPLAY STAND ASSEMBLY INSTRUCTIONS This assembly instruction is intended for use with six digit eight inch digital displays. Suspension Arms 7606B Stand Kit Contents Pipe section 2 - Suspension Stand Arms with ‘J’ hooks 1 - Pipe Flange...
Need help?
Do you have a question about the 5830 and is the answer not in the manual?
Questions and answers