1. Manuals
  2. Brands
  3. Gasmate Manuals
  4. Electric Heater
  5. GM135-008
  6. Manual

Gasmate GM135-008 Manual

Electric column heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Electric Column Heater
Model No. GM135-008
Designed for outdoor use
.
Important: Retain these instructions for future use
4163-06/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GM135-008 and is the answer not in the manual?

Questions and answers

Related Manuals for Gasmate GM135-008

Summary of Contents for Gasmate GM135-008

  • Page 1 Electric Column Heater Model No. GM135-008 Designed for outdoor use Important: Retain these instructions for future use 4163-06/16...

  • Page 2: Before First Use

    INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS BEFORE FIRST USE • Do not locate in areas of high foot traffic, • Read and follow all the instructions below even ensure the power cord and heater are in if you feel you are familiar with the heater. view to avoid accidents.

  • Page 3: For Your Safety

    Installation • The use of extension cords may cause This heater is not designed for use within 1m or power voltage loss which will result in above a water source. damage to the heater this will NOT be Ensure that the heater is not positioned directly covered under warranty.

  • Page 4: Specific Safety Instructions

    SPECIFIC SAFETY INSTRUCTIONS WARNINGS Do not use the heater in areas where there is a • DO NOT attempt to modify the heater, power risk of explosion or fire from flammable gases. cord, power plug or the supplied accessories Ensure that the heating area is kept clear of in any way.

  • Page 5: Electrical Data

    Main Body connection to the mains supply. If in doubt always Cord Clip consult a qualified electrician. Washer Technical Specification Screw M4*28 Plug Model GM135-008 Remote Control Voltage: 220V-240V~ 50Hz Input Wattage: 1600W Accessories Pack Check List: Unit Weight: 7.8Kg...

  • Page 6: Installation

    ASSEMBLY INSTRUCTIONS INSTALLATION Step 1 Step 2 Step 3 Turn the main body upside Thread the plug and power Thread through base. Place down. supply cord through the centre the base on the base cover, of the base cover. threading the plug and power supply cord through the centre.

  • Page 7: Positioning The Heater

    6. Press switch on top of the heater to “O” to cut off the power totally. 7. Unplug lead from power point when not in use. Gasmate ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au Aber, Hamilton, N.Z.

Table of Contents