1. Manuals
  2. Brands
  3. Gasmate Manuals
  4. Electric Heater
  5. GM135-010
  6. Manual

Gasmate GM135-010 Manual

Electric heater with stand
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Electric Heater with Stand
Model No. GM135-010
Designed for outdoor use
.
Important: Retain these instructions for future use
4151-05/15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GM135-010 and is the answer not in the manual?

Questions and answers

Related Manuals for Gasmate GM135-010

Summary of Contents for Gasmate GM135-010

  • Page 1 Electric Heater with Stand Model No. GM135-010 Designed for outdoor use Important: Retain these instructions for future use 4151-05/15...

  • Page 2: Before First Use

    INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS BEFORE FIRST USE • Do not locate in areas of high foot traffic, • Read and follow all the instructions below even ensure the power cord and heater are in if you feel you are familiar with the heater. view to avoid accidents.

  • Page 3: For Your Safety

    Installation • The use of extension cords may cause This heater is not designed for use within 1m or power voltage loss which will result in above a water source. damage to the heater this will NOT be Ensure that the heater is not positioned directly covered under warranty.

  • Page 4: Specific Safety Instructions

    SPECIFIC SAFETY INSTRUCTIONS WARNINGS Do not use the heater in areas where there is a • DO NOT attempt to modify the heater, power risk of explosion or fire from flammable gases. cord, power plug or the supplied accessories Ensure that the heating area is kept clear of in any way.

  • Page 5: Electrical Data

    Screw x 4 connection to the mains supply. If in doubt always Upper Tube extension consult a qualified electrician. Adjustable Fastener Technical Specification Upper Tube Middle Tube Model GM135-010 Lower Tube Voltage: 220V-240V~ 50Hz Base Input Wattage: 1800W Washer Unit Weight: 11.7Kg...

  • Page 6: Installation

    ASSEMBLY INSTRUCTIONS INSTALLATION Step 1 Insert Lower Tube (9) into Base (10) ensuring Fig. A that tab on Lower Tube slots into hole in Base. Carefully turn the Base/Lower Tube assembly upside down and secure Lower Tube to Base with Fig.

  • Page 7: Positioning The Heater

    6. Then switch off the heater at the back of the control box and then off at the power point. 7. Unplug lead from power point when not in use. Gasmate ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au...

Table of Contents