CONTENTS MAINTENANCE STRUCTURE OF THE PRODUCT Assembly and parts description Cleaning the Side Brush Parts list Cleaning the Dustbin, Sponge and Filter Cleaning the Water Tank Cleaning the Sensor and Wheel SAFETY INSTRUCTIONS Cleaning the Charge Terminal Cleaning the Brushroll Technical data Warning Safety Instructions...
Release Button Water Tank Parts list Charging Base x1 Side Brush x2 Pairs HEPA Filter x1 Mop Cloth x1 Manual Mop Cloth Holder x1 Cleaning Brush x1 Vibration Mopping Power Cable x1 Manual x1 Assembly x1 only for M7 Pro...
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. Charging Base is only applicable to the product M7/M7 Pro Do not use without dustbin and /or filters in place. Children shall not play with the appliance...
If the robot will not be used for a long time, fully charge the robot and power OFF for storage and unplug the charger. For use only with M7 and M7 Pro Charging base. This appliance is not intended for use by persons (including children) with...
Installing the Side Brushes Cleaning Turn the unit over. Please clean up the wires and sundries scattered on the ground and remove With unit upside down, align side brush valuable, frogile items that are easy to fall before cleaning. over brush post. Please keep the color of If there is a suspended environment in the clean area, please use objects to side brushes' same as each brush post's.
Mopping Using APP 1 Attach mopping cloth to the 2 Press the button on tank and mopping holder. pull to remove. If your home WiFi name or password is changed, you will need to re-establish connection with your robot vacuum. App supports iOS 9.0 and above, Android 6.0 and above phone system versions, but Pad device is not accepted;...
MAINTENANCE M-smartLife App Quick Guide Cleaning the Side Brush Regularly check the side brush for hair wrapping. Clean the side brush with the cleaning tool or a rag. If the Wi-Fi in your home is unstable, it may cause a certain delay in the related If the side brush has deformed from hair wrap,remove the side brush operations of the M-Smart App.
3 HEPA filter is on the side of dust 4Have dust cup inserted back to robot. cup.Please keep HEPA and sponge totally dry before using. 3 Open the cover and pour out the remaining water in the water tank. 4 Wipe dry the water tank. Exposure to sunlight is not recommended.
FAQs Cleaning the Brushroll In case of malfuntion, please refer to the following table. Pull the middle area of brush roll to take part it. Problem Possible reason Solution The power switch is not Power on the appliance. turned on while charging. Make sure the appliance is fully The appliance will The appliance and charging...
Page 11
WiFi configurations of typeormodel:M7/M7 Pro The WiFi password t h e cleaner and add or network is changed. household electrical towhichthisdeclarationrelatesisinconformitywiththeessentialrequirementsand appliances once again for operation.
Need help?
Do you have a question about the M7 and is the answer not in the manual?
Questions and answers