Table of Contents
Advertisement
INTL75ST-English-UK.qx
6/16/99 10:13 AM
INSTALLATION
CB HANGER
9
INSTALLING
CB HANGER
1. Hold CB hanger in
location desired for
mounting. Make certain
that nothing will interfere
with the hanger's
installation.
2. Mark the location for the
two mounting screws
(screws included).
3. Drill holes and mount CB
hanger.
Page 14
INSTALLATION
CB ANTENNA
CB ANTENNA INSTALLATION
A
For the most reliable operation and
maximum range, Cobra recommends
using a vertically polarized, quarter
wavelength whip antenna (illustration A).
Shorter, loaded-type whips are adequate
when maximum range is not required
(illustration B).
NOTE: Mobile installations (cars, vans,
lorries, boats, etc) should be made only
with a non-directional antenna system.
• A standard antenna connector
(Type SO-239) is provided on the
Connector Box for easy connection to
a standard PL-259 cable termination.
• Cobra antenna models are
recommended; see your local CB dealer.
• For maximum efficiency in boat
installations, an earthing plate is required,
unless the vessel has a steel hull. Consult
B
your CB dealer for information regarding
an adequate earthing system.
• Be sure that the antenna is properly
connected and tuned (SWR) to the radio
before transmitting. Prolonged transmitting
without an antenna, or use of a poorly
matched antenna, could cause damage to
the transmitter.
10
Advertisement
Table of Contents
