Advertisement
1 . S a f e t y G u a r d
1.1 normal instructions
1. Please read and understand this manual before any operation. This manual provides basic information of installment,
operation and adjustment as well as some required knowledge and solutions to some improper operations that may
lead to damages and accidents.
2. Keep hands/any part of body out of moving parts of the machine, such as spindle, lead screw, and rod screw.
3. Before the machine is powered in, check the circuits and its parameter, the fuses, and electric system, and motors
and make sure all are in good order.
4. Check every small part fixed on the machine. Do not start work until a normal trial run.
5. Do not wear loose clothing, gloves, neckties, rings or other which may get caught in moving parts. Wear protective
hair covering to contain long hair.
6. Do not touch any buttons when your hands are wet.
1.2 Safety Rules
1.2.1 Warning Level
Danger： refers to mechanical or electrical damages caused by parts， tools，work-piece， and splashed solid or liquid. All
those situation are with highly dangerous.
Warning: refers to personal damage or injury or permanent damage to the machine caused by improper or non-standard
operation. The situation is regarded as medium dangerous.
Note: refers to potential damage or injury may occur due to some bad performance. The situation is regarded as light
dangerous but must pay more attention to it.
1.2.2 Before Connecting With Power
◆ Check wires and make sure insulated layers of them are in good status.
◆ Examine the wires tied in are in line with the requirement of this lathe, especially the fuses.
◆ Before the machine is powered in, check the circuits and its parameter, the fuses, and electric system, and motors and
make sure all are in good order.
1.2.3 Preparation before Turning Machine On
◆ Lubricate with correct oil and oil is enough as required.
◆ Switches and handles are flexible.
◆ Check every small part fixed on the machine.
◆ Check all the safety guards are in good order.
◆ Never place tools and other things on the spindle box, tool posts and guards.
◆ Close the door of gear before turning on the machine.
◆ Keep workshop child proof.
1 - 1
Advertisement
