ABB ACH580-01 PxR R3 Instructions Manual page 7

REPLACEMENT INSTRUCTIONS | ACH580-01 PXR UL TYPE 1/12 , R2/R3/R4
Step Instruction
20
Place enclosure cover in place and secure using two (2) M4x16 screws
that were removed earlier.
Using a T20 bit, torque to 14 in-lb (1.5 Nm).
UL Type 12: Reinstall the hood to drive.
21
Power and reprogram the drive.
22
Test and verify drive operation and motor direction.
23
Back-up and save parameters to the keypad prior to putting the drive
back into service.
Diagram
7