Virgin Installation Wizard; Initial Setup Installation; Instant Initial Cloning And Software Upgrade - Philips BFL2114/12 Series Professional Installation Manual

5. Virgin installation wizard

Out of the box a new TV will be in virgin mode. This means that you will have to go through the virgin
installation wizard to apply the first settings of the TV.
You might need to wake up the TV from standby.
5.1.1

Initial Setup installation

When starting up the TV in virgin mode you will see the first screen indicating Initial Setup.
The TV is now searching in the background on USB, Network and RF for a new clone file containing all
new settings for the TV and/or a new software update.
Note: Only, if new clone file or software is recognized in the background the monitor will reach out to
the Instant Initial Cloning (IIC) wizard.
You can also see the model name and SW version of the TV.
If there is no need to load a clone file in this TV (for example if you want to make a new installation to
create a master clone file) then you need to press "OK" to activate the skip button.
5.1.2

Instant initial cloning and software upgrade

If you want to upgrade the TV software and load a new clone file in the TV via USB you have to do
following steps:
•
Disconnect the TV from the mains power
•
Insert a USB device with both the new SW (See chapter "Software upgrade") and the clone file
you want to load in the TV
You must see following 2 files in the root of your USB device (remove all other files and folders)
Note: Both folder name and the upg file are case sensitive. If multiple clone files are on a USB
device, the "MasterCloneData" will be used for cloning
•
Connect the mains power to the TV
•
Wake up the TV from STBY if required
- 21 -