Philips BFL2114/12 Series Professional Installation Manual page 108

o In the next screen you need to select the
Cable operator
Note: This list is country dependent
o In the next screen you can [Start] or
[Configure] some more settings, these
settings are also available
professional menu. If you have changed
the setting you can return back using the
color keys as indicated on the screen
Note: By default [Quick Scan] is used, you
need to change the setting if you want to
do a full scan
o Next, you need to set the Network
Frequency and the Network ID. If you
[Skip] the installation will just start the
channel installation
Note: The default values (if these screens
are shown) are depending on the selected
operator
o Once all settings are done the TV will start
searching channels
o Once done you will see the result of the
search being the amount of channels
found
o Using [Done] the wizard you will exit the
menu and TV will tune to the first installed
channel
- 107 -
in the