Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Philips Signage BDL5560EL
Summary of Contents for Philips Signage BDL5560EL
- Page 1 BDL5560EL V1.00 www.philips.com/welcome User Manual (English)
-
Page 2: Safety Instructions
Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources. • Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics. • Do not block the ventilation holes on the cabinet. • When positioning the display, make sure the power plug and outlet are easily accessible. • When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. • Do not subject the display to severe vibration or high impact conditions during operation. • Do not knock or drop the display during operation or transportation. Maintenance: • To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display, grasp the frame to lift; do not lift the display by placing your hand or fingers on the LCD panel. • Unplug the display if you are not going to use it for an extensive period of time. - Page 3 BDL5560EL Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Consult a service technician if the display does not operate normally when you have followed the instructions in this manual. • The casing cover should be opened only by qualified service personnel. • Keep the display out of direct sunlight and away from stoves or any other heat sources. • Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics. • Do not block the ventilation holes on the cabinet. • Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
- Page 4 BDL5560EL Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.
- Page 5 BDL5560EL Electric, Magnetic and Electromagnetic Fields (“EMF”) 1. We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. 2. One of our leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. 3. We are committed to develop, produce and market products that cause no adverse health effects. 4. We confirm that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. 5. We play an active role in the development of international EMF and safety standards, enabling us to anticipate further developments in standardization for early integration in its products. Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED.
- Page 6 BDL5560EL China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr 6+) (PBB) (PBDE) 外壳 液晶面板 电路板组件 附件 (遥控器， 电源线， 连接线) 遥控器电池 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求. 環保使用期限 此標識指期限(十年)，電子信息產品中含有的有毒有害物質或元素在正常使用的條件下不會發生外泄或突變...
- Page 7 BDL5560EL North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative)
- Page 8 BDL5560EL Restriction on Hazardous Substances statement (India) This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. E-Waste Declaration for India This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment . The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environ-ment. For more information about where you can drop off your waste equipment for recycling in India please visit the below web link. http://www.india.philips.com/about/sustainability/recycling/index.page viii...
-
Page 9: Table Of Contents
BDL5560EL Table Of Contents Operation ................. 16 4.1. Watch the Connected Video Source ......16 4.2. Change Picture Format ............16 Unpacking and Installation ............1 4.3. Choose your Preferred Picture Settings ...... 16 1.1. Unpacking ..................1 4.4. Choose your Preferred Sound Settings ....... 16 1.2. Package Contents ................1 4.5. Play multimedia files via Local Area Network ..16 1.3. -
Page 10: Unpacking And Installation
BDL5560EL Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2. Package Contents Please verify that you received the following items with your package content: • LCD display • CD ROM • Remote control with AAA batteries • Power cord (1.8 m) • VGA cable (1.8 m) CD ROM • RS232 cable (1.8 m) Quick start guide • Daisy Chain Cable (1.8 m) • Quick start guide... -
Page 11: Installing And Removing Table Stands (Optional)
BDL5560EL 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: T he longer side of the stand should face the front of the display. Carrying handle Thumbscrews Guide block Longer portions face the front... -
Page 12: Mounting On A Wall
BDL5560EL 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Table Tabletop stand 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc). 3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. -
Page 13: Mounting In Portrait Position
BDL5560EL 1.6. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise. The “ ” logo should be on the LEFT side when facing the display. 1.6.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 2. Peel off the protective film at the back of the “ ” logo sticker. Hold and press the guider with your left hand. Put the “ ” logo sticker with its adhesive side down into the logo hole with your right hand, and press to make it stick tightly onto the front bezel. -
Page 14: Operating Instructions Of Edge Alignment Kit
BDL5560EL 1.7. Operating Instructions of Edge Alignment Kit 1.7.1. Installing Edge Alignment Kit • Before install edge alignment kit, displays must be mounted to video wall frame correctly. • Using “Thumb Screw” for easy installing. • Using “Edge Alignment Kit-1” on adjacent four displays. • Using “Edge Alignment Kit-2” on adjacent two displays. • Install the “Edge Alignment Kit-2” with 2 PCS of M4 screw. Longer edge face to the outer side of display NOTE: W hen installing the edge alignment kit, please consult a professional technician for proper installation. We accept no liability for installations not... -
Page 15: Parts And Functions
BDL5560EL Parts and Functions 2.1. Control Panel MUTE INPUT MENU [ ] button Remote control sensor and power status indicator Use this button to turn the display on or put the display to standby. • Receives command signals from the remote control. • Indicates the operating status of the display without OPS: [MUTE] button - Lights green when the display is turned on Switch the audio mute ON/OFF. - Lights red when the display is in standby mode [INPUT] button - Lights amber when the display enters APM mode Choose the input source. - When {SCHEDULE} is enabled, the light blinks green and red • Used as [... -
Page 16: Input/Output Terminals
BDL5560EL 2.2. Input/Output Terminals 10 11 12 13 15 16 AC IN DisplayPort IN / DisplayPort OUT AC power input from the wall outlet. DisplayPort video input / output. MAIN POWER SWITCH VGA IN (D-Sub) Switch the main power on/off. VGA video input. AC OUT COMPONENT IN (BNC) AC power output supply to the AC IN jack of a media player. Component YPbPr video source input. IR IN / IR OUT Y/CVBS IR signal input / output for the loop-through function. -
Page 17: Remote Control
BDL5560EL 2.3. Remote Control [ ] POWER button Turn the display on or put the display to standby. 2.3.1. General functions [PLAY] buttons Control playback of media files. ] SOURCE button Choose input source. Press [ ] or [ ] button to choose from Network HDMI 1 HDMI 2 DisplayPort Card DVI-D YPbPr ] button to , or . Press [ confirm and exit. -
Page 18: Inserting The Batteries In The Remote Control
BDL5560EL 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions: • Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment. • Do not mix battery types. • Do not combine new batteries with used ones. It causes shorter life or leakage of batteries. • Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery acid, as it can damage your skin. -
Page 19: Connecting External Equipment
BDL5560EL Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using COMPONENT video input Audio Out COMPONENT Out (YPbPr) DVD / VCR / VCD [AUDIO IN] [COMPONENT IN] (YPbPr) 3.1.2. Using Video Source input Audio Out Y/CVBS Out DVD / VCR / VCD... -
Page 20: Using Hdmi Video Input
BDL5560EL 3.1.3. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN] 3.2. Connecting a PC 3.2.1. Using VGA input VGA Out D-Sub 15 pin Audio Out [VGA IN] [VGA AUDIO IN] 3.2.2. Using DVI input DVI Out... -
Page 21: Using Hdmi Input
BDL5560EL 3.2.3. Using HDMI input HDMI Out [HDMI IN] 3.2.4. Using DisplayPort input DisplayPort Out [DisplayPort IN] 3.3. Connecting Audio Equipment 3.3.1. Connecting external speakers External speakers... -
Page 22: Connecting An External Audio Device
BDL5560EL 3.3.2. Connecting an external audio device Audio In Stereo Amplifier [AUDIO OUT] 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: M aximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.4.1. Display control connection Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [RS-232C] [RS-232C IN] [RS-232C OUT] [RS-232C IN] 3.4.2. -
Page 23: Analog Video Connection
BDL5560EL Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [DP] [DP IN] [DP OUT] [DP IN] Connect the [HDMI OUT ] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2. DVD / VCR / VCD DISPLAY 1 DISPLAY 2 [HDMI] [DVI IN] [DVI OUT] [DVI IN] 3.4.3. Analog video connection Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [VGA IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [VGA]... -
Page 24: Ir Pass-Through Connection
BDL5560EL 3.6. IR Pass-through Connection DVD / VCR / VCD [IR OUT] [IR IN] (DVD / VCR / VCD) Remote Control (BDL4765EL) 3.7. Wire-connecting to Network If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files via Local Area Network (Page 16) for more detail. -
Page 25: Operation
BDL5560EL Operation • {Movie}: Ideal settings for movies. • {Music}: Ideal settings for listening to music. NOTE: T he control button described in this section is mainly on the • {Game}: Ideal settings for games. remote control unless specified otherwise. • {News}: Ideal settings for spoken audio, such as the news. 4.1. Watch the Connected Video Source 4.5. Play multimedia files via Local Area See page 10 for external equipments connection. -
Page 26: How To Use Dlna-Dmr From Pc
BDL5560EL Setup 3. Press [ ] HOME button, Then, choose and press [ 8. Press [ ] button, then done. button. You can play photos, music and movies stored on a computer in your home network. To do so, you need to install recent media server software on the computer. A list of suitable media server software is available in the Help. -
Page 27: Play Multimedia Files From Usb Device
BDL5560EL 3. Set • To clear the list of offline media servers, press [ ] OPTIONS Clear offline servers button. Then, choose and press [ button. View network settings Network settings 4.6. Play multimedia files from USB device Static IP configuration Digital Media Renderer - D... -
Page 28: Playing Movie Files
BDL5560EL Music options Slideshow options While you play music, press [ ] OPTIONS button, then press [ ] OPTIONS button, then press While you play a slideshow, press [ button to choose an option: ] button to choose an option: • {Shuffle}: Enable or disable random play of tracks. • {Shuffle}: Enable or disable random display of pictures in the slideshow. • {Repeat}: Choose {Repeat} to play a track or an album repeatedly, or choose {Play once} to play a track once. • {Repeat}: Choose {Repeat} to watch a slideshow repeatedly or {Play once} to watch once. - Page 29 BDL5560EL 4. Now, you can see the web page. NOTES: • The Opera browser does not support FLASH format. • The browser is not a video source. It will not stay at the browser screen after you restart the display.
-
Page 30: Change Your Settings
BDL5560EL Change your settings 5.1. Quick picture and sound You can choose picture and sound settings with the help of the Using the remote control: settings assistant, which demonstrates the effect of your chosen setting immediately. 1. Press [ ] HOME button to display the OSD menu. Setup 2. Choose . Press [ ] button. Quick picture and sound ] button. 3. Choose . Press [ Continue 4. -
Page 31: Sound
BDL5560EL Advanced Advanced Access advanced settings such as gamma, tint, video contrast and so on. Access advanced settings to enhance your audio experience. • {Gamma}: Adjust the non-linear setting for picture luminance • {Auto volume leveling}: Enable the reduction of sudden volume and contrast. changes. • {Speaker settings}: Turn on or off the internal speakers. • {Tint}: Change the colour balance. • {Custom tint}: Customise colour balance setting. Only available • {Clear sound}: Enhance sound quality. -
Page 32: General Settings
BDL5560EL Example: 5 x 5 screen matrix (25 displays) 5.2.4. General settings H monitors = 5 displays V monitors = 5 displays Picture Menu language Sound Group ID H monitors Tiling Monitor ID Position Eco mode General settings Auto search Clock Scheduling Sleep timer EasyLink Local KB lock RC lock Frame comp. -
Page 33: Off Time
BDL5560EL On time 3. Set Picture Menu language Sound Group ID Schedule 1 Status Tiling Monitor ID Schedule 2 Source General settings Eco mode On time Schedule 3 Auto search Schedule 4 Off time Clock Schedule 5 Repeat modes... -
Page 34: Sleep Timer
BDL5560EL Playlist setting • {Lock but power}: Disable all the keyboard function except the 6. If {Source} {USB} is chosen. Go to [ ] button. 0001/0002 Photo • {Lock all expect volume and power}: Disable all the keyboard ], [ ] and [ ] button: function except the [ Photo RC lock Video Choose to enable or disable the button function of the remote control. -
Page 35: Network Settings
BDL5560EL Information OSD When you press [ ] POWER button to turn on the display from standby mode or change the input signal, the information OSD is displayed on the upper left corner of the screen. Choose {Off} to turn off this function. Factory settings Reset all your customized settings to the factory defaults. 5.3. Network Settings Setup ] HOME button, and go to 1. Press [ menu. Network Settings 2. Choose and press [ ] button. View network settings Network settings Static IP configuration Digital Media Renderer - D... -
Page 36: Usb Device Compatibility
BDL5560EL USB device compatibility USB Video Subtitle Formats (for language subtitles, etc.) Name File extension Format MPEG-4 time-based text .ttxt SAMI .smi HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based USB Multimedia Formats File extension Container Video Codec Resolution Frame Rate (fps) -
Page 37: Input Mode
BDL5560EL Input Mode VGA Resolution: Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 60 Hz 25.175 MHz 480 72 Hz 31.5 MHz Video Graphic Array 75 Hz 31.5 MHz WVGA 400 70 Hz 33.75 MHz 16:9 Wide Video Graphic Array 60 Hz 40 MHz SVGA 600 Super VGA 75 Hz 49.5 MHz 60 Hz 65 MHz 1024 768 Extended Graphic Array 75 Hz 78.75 MHz... -
Page 38: Pixel Defect Policy
We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. This notice explains the different types of pixel defects and defines the acceptable defect level for the LCD screen. In order to qualify for repair under warranty, the number of pixel defects must exceed a certain level as shown in the reference table. If the LCD screen is within specification a warranty exchange / claim back will be refused. Additionally, because some types or combinations of pixel defects are more noticeable than others, Philips sets even higher quality standards for those. 8.1. Pixels and Sub-Pixels A pixel, or picture element, is composed of three sub-pixels in the primary colors of red, green and subpixel blue. -
Page 39: Dark Dot Defects
Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots 8.5. Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. In the table below you can find specifications about: • Allowed amount of adjacent dark dots = (adjacent dark dots =1 pair of dark dots) • Minimum distance between dark dots • Total no. of all defective dots 8.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub- pixel defects exceeding the tolerances listed in the following table. -
Page 40: Cleaning And Troubleshooting
BDL5560EL Cleaning and Troubleshooting 9.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damage to the object as well as the display itself. • Be sure to disconnect all cables before moving the display. Moving the display with its cables attached may damage the cables and thus cause fire or electric shock. • Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure. Front Panel Cleaning Instructions • The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a soft, lint-free cloth. -
Page 41: Troubleshooting
BDL5560EL 9.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the 2. Make sure the power switch is switched on. display is not switched on. 3. Connect a signal connection to the display. 3. The selected input has no connection. 4. The display is in standby mode. Interference displayed on the display or audible... -
Page 42: Technical Specifications
BDL5560EL Technical Specifications Display: Item Specifications Screen Size (Active Area) 54.6” (138.7 cm) LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.63 (H) x 0.63 (V) [mm] Displayable colors 10bits(D),1.06 Billion colors Brightness (typical) 450 cd/m Contrast ratio (typical) 1300:1 Viewing angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 10W (L) + 10W (R) [RMS]/8Ω External Speakers 1 Way 1 Speaker System 82 dB/W/M/160 Hz ~ 13 KHz Audio Output Phone Jack x 1 0.5V [rms] (Normal) / 2 Channel (L+R) Audio Input RCA Jack x 2 0.5V [rms] (Normal) / 2 Channel (L+R) 3.5 mm Stereo x 1 RS232C 2.5mm Phone jack x 2... - Page 43 BDL5560EL General: Item Specifications Power Supply AC 100 - 240V, 50 - 60Hz Power Consumption (Max) 245W Power Consumption (typ.) 135 W Power Consumption (Standby & Off) <0.5W (RS232 in active) Dimensions (With Stand) [W x H x D] 1247.0 x 758.2 x 400.0 mm Dimensions (Without Stand) [W x H x D] 1247.0 x 717.8 x 70.0 mm Weight (With Stand) 32.6 Kg Weight (Without Stand) 30.3 Kg Gross Weight (Without Stand) 38.9 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational...
- Page 44 2014 © Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.