Service & Maintenance; Contact For Support; Software Update - COBHAM SAILOR 7222 VHF DSC Installation Manual

Service & maintenance

5.1 Contact for support

Contact your authorized dealer for technical service and support of the VHF radio. Before
contacting your authorized dealer you can go through the troubleshooting guide to solve
some of the most common operational problems.

5.2 Software update

5.2.1 Update software from a USB memory stick
To update software from a USB memory stick in the Control Unit, do as follows:
1. Download the new software
it to a USB memory stick.
2. Connect the USB memory stick with the new software to the USB interface on the
Control Unit.
3. Tap SETTINGS > SYSTEM on the Control Unit display.
4. Tap SOFTWARE UPDATE.
5. Select USB MASS STORAGE.
6. Browse and select the .tiif file with the new software.
7. Follow the instructions on the screen to complete the software update.
5.2.2 Update software from a computer.
To update software from a connected computer, do as follows:
1. Download the new software
it to your computer.
2. Connect your computer to one of the LAN connectors on the Control Unit.
3. In the Control Unit display, activate remote control of the Control Unit and access the
user interface from your browser as described in REMOTE CONTROL on page 4-13.
4. In the web interface on the computer, select SETTINGS > SYSTEM and then
SOFTWARE UPDATE.
5. Select UPLOAD.
6. Browse and select the .tiif file with the new software.
7. Follow the instructions on the screen to complete the software update.
1. You can download the software from the Cobham SYNC Partner Portal at
www.cobhamsatcom.com. Select Cobham SYNC Partner Portal > Downloads and locate
the SAILOR 7222 VHF DSC software.
98-171833-A
1
or acquire the software from Cobham SATCOM and save
1
or acquire the software from Cobham SATCOM and save
Chapter 5
5
5-1