Directed Electronics Python 880XP Installation Manual page 31

2. K K e e y y . . Turn the ignition ON. (The heavy-gauge PINK wire of the relay
satellite must be connected.)
S S e e l l e e c c t t t t h h e e r r e e c c e e i i v v e e r r C C h h a a n n n n e e l l . . Press and release the Valet/program switch
3.
the number of times necessary to access the desired channel. Once you
have selected a channel, press and HOLD the Valet/program switch once
more. The siren will chirp and the LED will blink the number of times
corresponding to the channel that has been accessed.
NOTE: If adding a transmitter/receiver, a button must be taught to the unit in the Channel One
or Channel Five position prior to programming other channels.
4. P P r r e e s s s s t t h h e e t t r r a a n n s s m m i i t t t t e e r r b b u u t t t t o o n n . . While holding the Valet®/Program switch,
press the button from the transmitter that you wish to assign to that
channel. The unit will chirp indicating successful programming. It is not
possible to teach a transmitter button to the system more than once.
5. R R e e l l e e a a s s e e . . Once the code is learned, the Valet®/Program button can be
released
Channel Number Function
1 Arm/Disarm/Panic
2 Silent Mode/Remote Valet/Trunk Release
3 Remote Start
4 Second unlock or other accessories
5 Arm only
6 Disarm only
7 Panic only
8 Auto-learn Standard Configuration*
9 Auto-learn Single Button Arm/Disarm Configuration*
10 Delete all transmitters
**NOTE: For Auto Learn Configurations, see Transmitter Configurations section of this guide.
C C h h a a n n n n e e l l s s # # 1 1 , , 5 5 , , 6 6 , , 7 7 : : Channels 1, 5, 6, and 7 are used to assign the arm, disarm and panic functions
to specific buttons on the transmitter/receiver. Teaching a button to Channel 1 or 5 erases some
information about that transmitter/receiver from memory. Any auxiliary functions that are desired
may have to be reprogrammed.
NOTE: To avoid confusion, delete all transmitters before changing button configurations.
© 2002
Directed Electronics, Inc.
Wire Color
RED/WHITE
VIOLET/BLACK
31