Before First Use - Russell Hobbs 18260SAM Instructions And Warranty

Mirror finish glow 2-slice toaster
Table of Contents

Advertisement

Available languages

Available languages

BEFORE FIRST USE

Carefully unpack the product making sure you keep all the packing material until all
the parts of the product have been found and the product has been used. We
recommend keeping all the packing material in a safe place in case at any time you
wish to re-pack the product for shipping purposes.
Place the appliance on a level and stable work surface.
Check the slots are empty.
Set the browning control to the highest setting (6).
Operate the toaster without bread, to cure the new elements.
They may smoke a bit, but it's nothing to worry about – ensure the room is well
ventilated.
OPERATING INSTRUCTIONS
Toasting Bread
1. Sit the toaster upright on a stable, level, heat-resistant surface.
2. Don't put it on or near anything that could be damaged even by moderate heat.
3. Route the cable so it doesn't overhang and can't be tripped over or caught.
4.
Bread may burn. Don't use the toaster near or below curtains or other
combustible materials, and watch it while it's hot.
5. Put the plug into the power socket (switch the socket on, if it's switchable).
6. Turn the browning control to the required setting (1 = light, 6 = dark).
7. Put bread into the toasting slots (maximum thickness 25mm (1in)).
8. Press the lever down fully – it won't lock down unless the toaster is connected to the
electricity supply.
9. The
light will glow and the elements will heat up
10. When it's done, the toast will pop up, the light and the elements will go off.
Eject
11. To stop the toaster before it's finished, press the
12. The toast will pop up, the light and the elements will go off.
Frozen Bread
13. This takes the guesswork out of toasting frozen bread.
14. Leave the browning control at your favoured setting, insert the frozen bread, lower the
lever, then press the
button.
button.

Advertisement

Table of Contents
loading

Table of Contents