To 1-Sided Copying (D460 Only) - Canon ImageCLASS D420 Basic Operation Manual

7
Press [Start].
– To cancel all settings, press
– When you switch the mode by pressing the
mode keys such as
will be canceled. If you want to keep the
settings, store the settings as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <2-SIDED> (See "COPY SETTINGS, "
on p. 10-3.)
– You can skip steps 5 and 6. In this case, the
machine scans 2-sided documents in the
<BOOK TYPE> orientation and outputs the
same way.
– If you press [Start] in step 5 after selected
<CALENDAR TYPE>, the machine scans 2-sided
documents in the <CALENDAR TYPE>
orientation and outputs the same way.

2 to 1-Sided Copying (D460 Only)

You can make 1-sided copies from 2-sided
documents.
1
Place documents in the ADF.
For details, see "Placing Documents, " on p. 2-4.
2
Press [COPY].
3
[Stop/Reset].
[SCAN], all settings
4
5
6
Press [2-Sided] to select <2 >1-SIDED>,
then press [OK].
2 - S I D E D
2
Press [ ] or [ ] to select <BOOK
TYPE> or <CALENDAR TYPE>, then press
[OK].
T Y P E O F O R I G I N A L
– <BOOK TYPE>: The front and back sides of the
document have the same top-bottom
orientation.
– <CALENDAR TYPE>: The front and back sides
of the document will have the opposite top-
bottom orientation.
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
Ex.
1 0 0 % *
T E X T / P H O T O
Press [Start].
– To cancel all settings, press
– When you switch the mode by pressing the
mode keys such as
will be canceled. If you want to keep the
settings, store the settings as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <2-SIDED> (See "COPY SETTINGS, "
on p. 10-3.)
– You can skip step 4. In this case, the machine
scans 2-sided documents in the <BOOK TYPE>
orientation to make 1-sided copies.
2-Sided Copying
> 1 - S I D E D
B O O K T Y P E
L T R
1
[Stop/Reset].
[SCAN], all settings
3-21