Adjusting Manually - Canon ImageCLASS D420 Basic Operation Manual

Adjusting Manually

You can adjust the density to the most appropriate
level for the document manually.
1
Place documents.
For details, see "Placing Documents, " on p. 2-4.
2
Press [COPY].
3
Press [Density] to select the
manual mode.
4
Press [ ] or [
density, then press [OK].
D E N S I T Y
- L T
– [ ]: to make light documents darker
– [ ]: to make dark documents lighter
– To cancel all settings, press
– When you switch the mode by pressing the
mode keys such as
will be canceled. If you want to keep the
settings, set the density as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <DENSITY> → <MANUAL> (See
"COPY SETTINGS, " on p. 10-3.)
] to adjust the copy
D K +
[Stop/Reset].
[SCAN], all settings
5
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
Ex.
1 0 0 %
T E X T / P H O T O
6
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].
Adjusting Density
L T R
1
3-9