Selecting Image Quality
Selecting Image Quality
You can adjust the image quality of copies according to the types of documents. A correct
selection is necessary for the optimal reproduction of the colors of the document. These
settings return to the default values if the machine remains idle for a certain period of time
or if you press
The default settings is <TEXT/PHOTO>.
–
Combinations of these four modes (TEXT/PHOTO, TEXT, PHOTO, TEXT/PHOTO+) cannot be selected at the same time. If
you select one of these modes, the previously set mode is canceled.
–
If the document is a transparency, select the document type, then adjust the exposure to the most appropriate level for
the document.
1
Place documents.
For details, see "Placing Documents, " on p. 2-4.
2
Press
3-6
[Stop/Reset].
[COPY].
3
Press
[Image Quality] repeatedly
to select the document type.
–
<TEXT/PHOTO>: For documents that contain
text and photos
–
<TEXT>: For text documents
–
<PHOTO>: For documents that contain fine
text or photos
–
<TEXT/PHOTO+>: For documents that
contain fine text and photos
Copy density automatically changes to the
manual mode when <TEXT/PHOTO>, <PHOTO>,
or <TEXT/PHOTO+> is set.