Table of Contents
Advertisement
Operating on the Remote Control
To
Turn on or off (standby) the
power
Select a source
Adjust the volume
Drop the volume in a moment
Enhance the sound
(Sound Turbo)
Reinforce the bass sound
Adjust the tone (Bass/Treble)
Change the display
information
Turn off the System by using
the Sleep Timer
Display Information
File type indicators
Source indicators
Play mode indicators (See
page 9.)
QPL indicator (See page 14.)
• To check the remaining time after setting the Sleep Timer, press once.
RESUME indicator (See page 7.)
(See page 7.)
Main display
Press
The STANDBY lamp on the System turns off/on.
See "Playing Back a Disc/USB Mass Storage Class Device" on
page 7.
See "Listening to the Radio" on page 10.
See "Listening to a Digital Audio Player" on page 14.
You can adjust the volume level from level 0 ("VOL MIN") to
level 31 ("VOL MAX").
To restore the volume, press again, or adjust the volume
level.
To cancel, press again.
Press and hold until the AHB indicator lights up on the
display.
• When Sound Turbo is activated (see above), this function
cannot be activated.
To cancel, press and hold again.
• Once: for the bass level
• Twice: for the treble level
Then, press VOLUME + to increase the level or press
VOLUME – to decrease it.
• You can adjust the bass and/or treble level from –3 to +3.
You can switch between the clock and the various source
information display.
• For setting the clock, see page 15.
Press briefly and repeatedly to specify the time (in minutes)
as follows:
S.TURBO (Sound Turbo) indicator (See above.)
AHB indicator (See above.)
FM/DAB reception indicators (See page 10.)
Band indicators
Timer mode indicators (See page 15.)
SLEEP indicator (See above.)
A.STBY (Auto Standby) indicator (See page 8.)
Radio Data System indicators (See page 12.)
Canceled
6
Advertisement
Table of Contents
