Table of Contents
Advertisement
FM antenna (supplied)
Extend it to obtain the best
reception.
AM loop antenna
(supplied)
Turn it until the best
reception is obtained.
For better FM reception
Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with a coaxial type
connector (IEC or DIN45325).
To assemble the AM loop antenna
Attaching the Core Filter
Attach the provided core filter to the USB cable (not supplied) to reduce
interference.
1
Stopper
USB cable
2
To the System
3
NOTE
• Do not damage the cable by applying excessive force when winding.
• Use a USB 2.0 cable of less than 1 m in length.
Outdoor FM antenna
Release the stopper of the
core filter.
Run the USB cable through
the core filter, leaving
approx. 2 cm between the
unit-side end of the USB
cable and the core filter.
Firmly wind the cable twice
2 cm
inside the cutout of the core
filter.
Close the core filter until you
hear a clicking sound.
(not supplied)
4
Advertisement
Table of Contents
