Summit Appliance accucold FFAR12W Instruction Manual page 13

• The appliance is not properly leveled.
The door will
• The door was reversed and not properly
not close
re-installed.
properly.
• The gasket is dirty.
• The shelves are out of position.
• "E0" indicates a communication error for
3-zone models.
• "E1" or "E2" indicates that the air
Display "E0",
temperature sensor has failed.
"E1". "E2",
• "E3" or "E4" indicates that the defrost
"E3", "E4",
"E5" or "E7". sensor in the evaporator has failed.
• "E5" indicates a defrost heater failure.
• "E7" indicates a door switch failure.
• The appliance door has been open for
The alarm
sounds.
longer than 60 seconds.
• The display temperature is out of range.
The icon "--" is
lit and flashing
in the
temperature
display.
If you've checked the table above and find that you still need help with your appliance, call our Customer
800-932-4267
Service facility at
questions.
between 9:00AM and 5:00PM ET. We will do our best to answer your
13
• Level the appliance with the
adjustable feet.
• Check the door hinge and reassemble
correctly.
• Clean the door gasket.
• Check the shelves and refit correctly.
• Call for service.
• Close the door.
• Only temperatures within the range
0~99°F/-9~37°C can be displayed. If
the temperature is not within this
range, the icon "--" will be displayed
instead. This is normal.