Onkyo TX-8390 Instruction Manual page 94

Setting Item Default Value Setting Details
Network Standby On When this function is set to "On", the network
function works even in standby state, and you can
turn on the power of the unit via network using
an application such as Onkyo Controller that can
control this unit.
Bluetooth Wakeup Off
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can
be selected when the network function is activated.
• When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption is
minimized by automatically entering the HYBRID
STANDBY mode where only the essential circuits
operate. Note that even if this function is set to
"Off", when any of the HDMI CEC (
HDMI Standby Through ( p89), USB Power
p93) and Bluetooth
Out at Standby (
Wakeup ( p94) functions is enabled, this
function will be in "On" state regardless of the
setting.
• When connection to the network is lost, "Network
Standby" may be disabled to reduce power
consumption. In such a case, turn the unit on by
using the power button on the remote controller
or main unit.
This function wakes up the unit on standby by
connecting a BLUETOOTH-enabled device.
"On": When this function is used
"Off": When this function is not used
• When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption
is minimized by automatically entering the
HYBRID STANDBY mode where only the
essential circuits operate.
• This setting is fixed to "Off" if "Bluetooth" - "Auto
Input Change" is set to "Off".
Contents Connections
≫
„ 5. Works with SONOS
Change the settings to connect with the Sonos Connect.
Setting Item Default Value
Input Selector Off
Connected Device -
p89),
Output Zone Main
94
Playback
≫
Setting Details
Select the input selector to which the Sonos
Connect is connected.
• Selecting "Off" disables the interlock function
with Sonos.
Displays the Sonos Connect connected to the
same network as the network of this unit. Press
the ENTER button to select the connected Sonos
Connect.
• Products (e.g. Play:3 unequipped with an output
terminal) other than the Sonos Connect are also
displayed in the device list and selectable. In that
case, when playback on the Sonos side starts,
the input is switched, however, audio is not
output. Select the room name of the connected
Sonos Connect.
• Up to 32 devices can be displayed on the Sonos
product list screen. If you cannot find the Sonos
Connect to be interlocked, return to the previous
screen, turn off the product you do not interlock,
and try again.
• To use this function, set "Input Selector"
beforehand.
Select the zone where you want to listen to the
music.
"Main": Outputs audio only to the main room
(where this unit is located).
"Zone 2": Outputs audio only to the separate room
(ZONE 2).
"Main/Zone 2": Outputs audio to both the main
room and separate room.
• To use this function, set "Input Selector"
beforehand.
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫