Onkyo TX-8390 Instruction Manual page 83

Setting Item Default Value Setting Details
PHONO --- "HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign a desired HDMI IN jack to the PHONO
button. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" first.
Contents Connections
≫
„ 3. Digital Audio Input
Change input assignment between the input selectors and DIGITAL IN COAXIAL/
OPTICAL jacks. If you do not assign a jack, select "---".
Setting Item Default Value
BD/DVD COAXIAL
GAME ---
CBL/SAT ---
PC ---
CD OPTICAL 1
TV/TAPE OPTICAL 2
PHONO ---
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1
kHz, 48 kHz, 88.2 kHz, 96 kHz/16bit, 20bit, and 24bit.
83
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
"COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a
desired DIGITAL IN jack to the BD/DVD button.
"COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a
desired DIGITAL IN jack to the GAME button.
"COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a
desired DIGITAL IN jack to the CBL/SAT button.
"COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a
desired DIGITAL IN jack to the PC button.
"COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a
desired DIGITAL IN jack to the CD button.
"COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a
desired DIGITAL IN jack to the TV/TAPE button.
"COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a
desired DIGITAL IN jack to the PHONO button.
≫