Onkyo TX-8390 Instruction Manual page 73

Contents Connections Playback Setup
≫ ≫ ≫ ≫
Using MY INPUT
Registration
You can register a variety of settings ( p74), such as the current input
selection or listening mode, in the 4 MY INPUT presets, and then recall these
easily with the MY INPUT dial.
For example: Turn the MY INPUT dial to select a preset number, and then
press the dial to automatically switch input to "TUNER" and start receiving the
registered station. Also, the listening mode and volume level are switched as
registered.
Perform the following steps in the state of the setting to register.
1. Turn the MY INPUT dial and to light one of the indicators 1 to 4.
2. Press and hold the MY INPUT dial.
3. "Preset Written" appears on the display, and the setting is registered. If
registration has already been made, the registered setting is overwritten.
SETUP
73
Front Panel≫ Rear Panel≫ Remote≫