Onkyo TX-8390 Instruction Manual page 84

„ 4. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks. If you
do not assign a jack, select "---".
Setting Item Default Value
BD/DVD AUDIO 1
GAME ---
CBL/SAT AUDIO 2
PC ---
CD AUDIO 4
TV/TAPE AUDIO 3
PHONO PHONO
„ 5. My Input Information
You can view the content registered in MY INPUT 1 to 4.
The registered settings are displayed in the list.
(Main)
Setting Item Default Value
Preset Preset 1
Input Selector ---
Network Service ---
Band ---
Station ---
Setting Details
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the BD/DVD button.
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the GAME button.
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the CBL/SAT button.
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the PC button.
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the CD button.
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the TV/TAPE button.
The setting cannot be changed.
Setting Details
Selects a preset number from among "Preset 1",
"Preset 2", "Preset 3" and "Preset 4".
Displays the input selector that has been set.
Displays the Network Service that has been set.
Displays the band, "AM", "FM" or "DAB" that has
been set.
Displays the Preset Name of the radio station that
has been set.
Contents Connections
≫
Setting Item Default Value
Listening Mode ---
Volume ---
Multi Zone ---
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed
with the name set by "4. Source" - "Name Edit". If the name is not set, the frequency of
the radio station is displayed instead.
(Zone 2)
Setting Item Default Value
Input Selector ---
Network Service ---
Band ---
Station ---
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed
with the name set by "4. Source" - "Name Edit". If the name is not set, the frequency of
the radio station is displayed instead.
84
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Displays the listening mode (Stereo, Pure Audio,
Direct) that has been set.
Displays the volume level that has been set. (Upper
limit "82")
• You cannot set a higher value than that of
" " " "
Audio Adjust - Volume - Maximum Volume
Displays the output destination (Multi Zone) that
has been set.
Setting Details
Displays the input selector that has been set.
Displays the Network Service that has been set.
Displays the band, "AM", "FM" or "DAB" that has
been set.
Displays the Preset Name of the radio station that
has been set.
≫
"
3.
"
.