Onkyo TX-8390 Instruction Manual page 28

Connecting Playback Devices
Connecting an AV Component with HDMI Jack Mounted
a
BD/DVD
a HDMI cable
Contents
PC
GAME Cable/Satellite
set-top box
Connections
≫
This is a connection example of an AV component equipped with an HDMI jack.
When connecting with an AV component that conforms to the CEC (Consumer
Electronics Control) standard, you can use the HDMI CEC function (*) that
enables linking with input selectors, etc. and the HDMI Standby Through function
that can transmit video and audio signals of the AV component to the TV even if
this unit is in standby mode.
• If a 4K high-quality video is played, use a Premium High Speed HDMI Cable
or Premium High Speed HDMI Cable with Ethernet whose package has a
"PREMIUM Certified Cable" label. Furthermore, in "Switching the HDMI 4K
Signal Format Input and Output by this Unit" ( p77), change the setting
value to "Enhanced".
Setup
• The HDMI CEC function and HDMI Standby Through function are
automatically enabled if you select "Yes" for "3. ARC Setup" in Initial Setup (
p100). If "No, Skip" is selected, settings are required in the Setup menu after
Initial Setup is completed. Press SETUP on the remote controller, and select
"5. Hardware" - "HDMI" to make the settings. (
• The audio from connected AV components can only be played when the audio
is PCM or DSD. To play PCM audio, set the audio output on the AV component
to output PCM.
(*) The HDMI CEC function: This function enables various linking operations
with CEC-compliant devices, such as switching input selectors interlocking with
a CEC-compliant player, switching audio output between TV and this unit or
adjusting the volume using the remote controller of a CEC-compliant TV, and
automatically switching this unit to standby when the TV is turned off.
28
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
p89)
≫