Table of Contents
Advertisement
Network Scanning
list's server
Add Printer
8.2.2
Display Server's Status
You can start MFP Server Control Center and select your MFP server to see the server
status which includes Host Information, TCP/IP, USB Devices Status and Supported
Protocols.
8.2.3
Set up Server's Configuration
General Configuration
Set Host Information: You have to set some information for networking
using SMB protocol:
Comment: optionally set to describe the server
Host Name: the name to represent the server for Windows networking
using SMB/CIFS protocol
Workgroup: the SMB/CIFS workgroup name that the server belongs
to.
File Server Codepage: If users want to communicate files using FTP
client tool or SMB on Windows 98 SE/Me/2000 with the Server, they have
to set their MFP server codepage to be same as the codepage that their
Windows PC is using. Generally, the criteria of choosing codepage are
based on your Windows codepage. For example, if your Windows
codepage is Traditional Chinese, you have to select Traditional Chinese
(Big5) in server. Please refer to Chapter 6 File Server Function.
USB Device Information: You can set printer names and display some
information of USB mass storages and scanners. Please refer to Chapter 4,
Chapter 6 and Chapter 7.
TCP/IP: You have to set the server's TCP/IP configuration to connect TCP/IP
network. Please see Chapter 3 Basic Installation for more details.
Supported Protocols: The server supports the following TCP/IP protocols:
TCP/IP
Enable LPR (Line Printer Remote) Printing: select or clear Enable LPR
Printing support. It is enabled in Factory Default.
Enable IPP Printing: select or clear Enable IPP Printing support. It is
enabled in Factory Default.
Enable Raw TCP Printing: select or clear Enable Raw TCP Printing
support. It is enabled in Factory Default and users may set the
protocol's TCP ports as following boxes:
-
-
: perform network scanner function of the highlight
: perform add printer function of the highlight list's server
TCP Port 1: set TCP port for the printer of USB1 port (default: 9100)
TCP Port 2: set TCP port for the printer of USB2 port (default: 9101)
54
Advertisement
Table of Contents
