Using Remote / Power Button - Kogan 5 Series User Manual

USING REMOTE CONTROL / POWER BUTTON
3. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity
markings (+ / -) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
3a 3b
WARNINGS
• One loading of batteries will last for 1 year under normal use.
• If you do not intend to use the remote controller for a long period of time,
remove them to avoid damage due to leakage.
• Do not use old and new batteries together.
• The batteries (battery pack or batteries installed) shall not exposed to
excessive heat such as sunshine, fire or the like.
4. Using remote control without bluetooth
Your Android TV remote control has bluetooth
capability, but until this is paired with your TV, you
will need to ensure the distance between the remote
control and the TV is no greater than 8 metres, at an
angle of no more that 30 degrees on either side (4a).
Point the remote towards the sensor at the front of
TIPS
Do not block the path between the sensor
and the remote control.
3c
4a
5. Turning TV on
a. Plug the power cord into a suitable power outlet. The standby will display
a light, showing that the TV is receiving power.
b. Press the POWER ( ) button (either on your remote control or in the lower
c.
TURNING TV OFF
POWER ( )
Press the button on the remote control to enter
standby mode.
To power down the TV completely, unplug the power cord from
the power outlet.
Do not leave your set in standby mode for long periods of time. If you
will not use the TV for a long time, it is recommended to unplug the
set from both the power outlet and aerial.
Red light on
5a
Standby mode
5c
TV on
5b
7