Power Button - Kogan 8 NU8020 Series User Manual

USING REMOTE CONTROL / POWER BUTTON
1. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity
markings (+ / -) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
1a 1b
WARNINGS
• One loading of batteries will last for 1 year under normal use.
• If you do not intend to use the remote controller for a long period of time,
remove them to avoid damage due to leakage.
• Do not use old and new batteries together.
• The batteries (battery pack or batteries installed) shall not exposed to
excessive heat such as sunshine, fire or the like.
2. Using remote control
Point the remote towards the sensor at the front
of the TV (this may differ from the illustration).
Ensure the distance between the remote
control and the TV is no greater than 8 metres,
at an angle of no more that 30 degrees on
either side (2a).
TIPS
Do not block the path between the sensor
and the remote control.
1c
2a
3. Using power button / joystick
The button/joystick on the lower-right panel controls your TV's basic features,
including the on-screen menu. To use the more advanced features, you must
use the remote control.
Power/Enter
Tap inwards once to confirm within any menu
Press and hold to display function menus
Press and hold to turn TV on while in standby
press in
Up
Tap to navigate up within any menu
Tap to recall last channel in DTV mode
Down
Tap to navigate down within any menu
Press and hold to return to previous menu
Tap to go to next channel in DTV mode
Right
Tap to navigate right within any menu
Increase volume during playback
Left
Tap to navigate left within any menu
Decrease volume during playback
8