USING REMOTE CONTROL / POWER BUTTON
1. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity
markings (+ / -) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
1a
1b
WARNING
S
• If you do not intend to use the remote controller for a long period of time,
remove them to avoid damage due to leakage.
• Do not use old and new batteries together.
• The batteries (battery pack or batteries installed) shall not exposed to
excessive heat such as sunshine, fire or the like.
2. Using remote control
Point the remote towards the sensor at the front of
Ensure the distance between the remote control
and the TV is no greater than 8 metres, at an angle
of no more that 30 degrees on either side (2a).
TIPS
Do not block the path between the sensor
and the remote control.
1c
2a
3a
BUTTON
3. BUTTON
Standby or switch on the TV.
CH+/ -
Selecting channel.
VOL +/-
Press to adjust the volume.
MENU
Menu button to open the menu
.
SOURCE
External signal input selection.
8