Power Button - Kogan Series 8 JU8200 User Manual

USING REMOTE CONTROL / POWER BUTTON
1. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity
markings (+ / -) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
1a 1b
WARNINGS
• One loading of batteries will last for 1 year under normal use.
• If you do not intend to use the remote controller for a long period of time,
remove them to avoid damage due to leakage.
• Do not use old and new batteries together.
• The batteries (battery pack or batteries installed) shall not exposed to
excessive heat such as sunshine, fire or the like.
2. Using remote control
Point the remote towards the sensor at the front
of the TV (this may differ from the illustration).
Ensure the distance between the remote
control and the TV is no greater than 8 metres,
at an angle of no more that 30 degrees on
either side (2a).
TIPS
Do not block the path between the sensor
and the remote control.
1c
2a
ON/OFF INPUT
MUTE
PVR
3. Using power button
The buttons on the lower-left panel controls your TV's basic features,
including the on-screen menu. To use the more advanced features, you must
use the remote control.
3a
POWER Enter or exit standby mode
VOL +
Increase volume
VOL -
Decrease volume
CH +
Scroll channel up
CH -
Scroll channel down
INPUT
Select source
MENU Enter or exit menu. Use CH+/- buttons to select item,
and VOL+/- buttons to adjust.
8