Displays2go RPHLTH Assembly Instructions

RPHLTH – Wall Mounted Health & Safety/Hygiene Station
Thread standoffs through all 6 holes along edges. Thread bolts through any
Attach both Glove Box Holder and Mask Holder to the body panel by
holes in the body and attach nut to back side.
sliding key holes down onto the two bolts. Tighten the nuts on the back.
Attach sign holder to the top of the body panel by sliding key holes down
onto the bolt. Tighten the nut on the back.
Attach both Hand Sanitizer Holder and Wipe Holder to the body panel by
3
sliding key holes down onto the two bolts. Tighten the nuts on the back.
1
v21.05

Health and Safety Panel (1)

Standoffs (6)

Nuts and Bolts (9)

8.5" x 11" Sign Holder (1)

Hand Sanitizer Holder (1)