1. Manuals
  2. Brands
  3. Displays2go Manuals
  4. Display Case
  5. FRCHVWBK
  6. Assembly instructions manual

Displays2go FRCHVWBK Assembly Instructions Manual

Half vision wall case
Hide thumbs Also See for FRCHVWBK:
1
2
3
4
5
6

Advertisement

Table of Contents

ASSEMBLY INSTRUCTIONS
HALF VISION WALL CASE - FRCHVWBK
IMPORTANT SAFETY INFORMATION:
Please take time to read and understand all of the steps needed to finish the assemly before installing the
unit. D2G is not responsible for any personal injury or product damage due to mishandling, incorrect
mounting, incorrect assembly or incorrect use of this product.
2 people are needed for assembly. 3 people are recommended.
if you have any questions regarding our products, please contact D2G customer service.
:
TOOLS NEEDED
Phillips Screwdriver
T20 Torx Screwdriver
Rubber Mallet
Ver. 04/18
1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FRCHVWBK and is the answer not in the manual?

Questions and answers

Related Manuals for Displays2go FRCHVWBK

Summary of Contents for Displays2go FRCHVWBK

  • Page 1 ASSEMBLY INSTRUCTIONS HALF VISION WALL CASE - FRCHVWBK IMPORTANT SAFETY INFORMATION: Please take time to read and understand all of the steps needed to finish the assemly before installing the unit. D2G is not responsible for any personal injury or product damage due to mishandling, incorrect mounting, incorrect assembly or incorrect use of this product.

  • Page 2: Parts And Hardware

    ASSEMBLY INSTRUCTIONS PARTS AND HARDWARE: Bottom Panel (A) X1 Front Toe Kick Panel (B) X2 Back Glass X1 Top Glass X1 Side Toe Kick Panel (C) X2 False Bottom Panel (D) X1 Front Glass Door X2 Glass Shelf X3 Side Glass X2 Back Panel (E) X1 NE09034-4 X2 HWI16-4 X1...

  • Page 3: Base Assembly

    ASSEMBLY INSTRUCTIONS How to join 2 boards with CAM lock: 1. BASE ASSEMBLY: Parts needed: (a) Insert cam post into flat surface of a board. Fit the hole in Panel B (X2) Cam Screw (X16) the edge of the joining board over the cam post. Panel C (X2) Cam Lock (X16) (b) Each cam lock has an open sec�on at the back.

  • Page 4: Storage Assembly

    ASSEMBLY INSTRUCTIONS How to install concealed hinges: 2. STORAGE ASSEMBLY: (a) Press the hinge cup into one flat-bo�omed hole in the door. Be Parts needed: sure the edge of the hinge is parallel with the edge of the door. Panel A (X1) Cam Screw (X20) (b) Drive wood screws through screw holes in the flange to fix the Panel E (X1)
  • Page 5 ASSEMBLY INSTRUCTIONS Place the 2nd side panel into the groove on other side, then 3. GLASS MODULAR ASSEMBLY: connect it with back glass and Panel A the same way as above. Parts needed: Back Glass (X1) Glass Corner Connector (X2) Side Glass (X2) Glass Edge Connector...

  • Page 6: Glass Door Assembly

    ASSEMBLY INSTRUCTIONS Install the lock through the hole at bo�om of the assembled glass 4. GLASS DOOR ASSEMBLY: Parts needed: door, and secure it with (2) screws from the back. Glass Door (X2) Glass Glazing (X4) HWI16-4 (X1) Glass Top Guide (X4) HWI17-4 (X1)

Table of Contents