Advertisement
RPFIRESFTY – Wall Mounted Fire Safety
Thread standoffs through all 6 holes along edges. Thread bolts through any
holes in the body and attach nuts to back side.
Attach both sign holders to the top of the body panel by sliding both key
holes down onto the bolt. Tighten the nut on the back.
3
Attach bottom pocket by pinching in both sides of the pocket and pressing
into the holes in the back plate. Press down and click the pocket into place.
Drop dividers down into slots inside of the pocket.
Station
1
V21.06
Fire Safety Panel (1)
Standoff (6)
Nuts and Bolts (3)
8.5" x 11" Sign Holder (1)
11" x 17" Sign Holder (1)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Displays2go RPFIRESFTY
Summary of Contents for Displays2go RPFIRESFTY
- Page 1 Station V21.06 RPFIRESFTY – Wall Mounted Fire Safety Fire Safety Panel (1) Thread standoffs through all 6 holes along edges. Thread bolts through any holes in the body and attach nuts to back side. Standoff (6) Attach both sign holders to the top of the body panel by sliding both key holes down onto the bolt.
- Page 2 Station V21.06 RPFIRESFTY – Wall Mounted Fire Safety Pocket (1) Dividers (5) Scan QR code to visit the product page: If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2g customer service at 844-221-3388.
Need help?
Do you have a question about the RPFIRESFTY and is the answer not in the manual?
Questions and answers