Advertisement
Table of Contents
ASSEMBLY INSTRUCTIONS
LEDDCP - Illuminated Metal Pedestal
IMPORTANT
Read all instructions before assembling the unit. Displays2go is not responsible for any damage or injury
caused by incorrect installation, assembly or use.
PARTS LIST
A. Frame Module
B. Frame Module with Door
C. Aluminum Bar - Top
D. Aluminum Bar - Mid & Bot
E. Side Panel - Clear
F. Side Panel - Black F1
Side Panel - Black F2
G. Top Panel - Clear
H. Bottom Panel - Black
I. LED lighting Panel
J. White Panel
K. Plastic Endcap
L. M3X12 Pointed Screws
M. M4X8 Machine Screws
N. Torx Wrench
O. Power Adapter Charger
C
D
E
F
F1
F2
A
X1
X1
X2
X4
X2
X1
X1
X1
X1
B
X1
X1
X4
X8
X4
X1
X1
G
H
I
J
Ver. 10/19
K
L
M
N
O
1 of 6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Displays2go LEDDCP
Summary of Contents for Displays2go LEDDCP
- Page 1 ASSEMBLY INSTRUCTIONS LEDDCP - Illuminated Metal Pedestal Ver. 10/19 IMPORTANT Read all instructions before assembling the unit. Displays2go is not responsible for any damage or injury caused by incorrect installation, assembly or use. PARTS LIST A. Frame Module B. Frame Module with Door C.
- Page 2 LEDDCP - Illuminated Metal Pedestal Alu. Bar-Middle Alu. Bar-Bottom NOTE: 1. Top aluminum bar has T-slot on one side ONLY. 2. Middle and Bottom aluminum bars have T-slot on both sides. 3. Bottom aluminum bar has velcro glued on the bottom.
- Page 3 LEDDCP - Illuminated Metal Pedestal STEP 1 Place Frame Module (A) on a flat surface. Insert the aluminum bars into the grooves on both sides of the Frame Module, then fix alu bars by fastening the screws with the wrench (N).
- Page 4 LEDDCP - Illuminated Metal Pedestal STEP 3 Connect the Frame Module with Door (B) with the assembled pedestal body. Be sure all the bar connectors and all panels inserted into the grooves on the Frame Module (B). Frame Module (B) Secure the Frame by tightening all screws in the aluminum bars that connecting with Frame Module with Door (B).
- Page 5 LEDDCP - Illuminated Metal Pedestal STEP 4 STEP 5 Carefully lift the assembled pedestal to its stand- Place the White Panel (J) above the LED lighting ing position. Panel as shown below: Open the door on the pedestal and connect the DC wire inside the pedestal with the wire at the bottom of the LED Lighting Panel (I).
- Page 6 Plug in the power adapter (O) to charge and power the unit. Turn on the switch and the assembly is finished. Scan QR code to visit the product page: If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service at 844-221-3388. 6 of 6...
Need help?
Do you have a question about the LEDDCP and is the answer not in the manual?
Questions and answers