Table of Contents Introduction ..........1 Application ..........1 Features ............ 2 Identifying Parts ........2 Measurement Procedures ......3 Specifications ..........5 Battery replacement ........6 Safety Precaution ........6 End of life ..........7...
MG-300 1 Introduction Safety precautions should be taken against electric appliances in places including medical institutions, schools and residential districts, where people usually stay for a long time, to prevent patients, babies and senior citizens from exposure to high electromagnetic waves.
MG-300 3 Features Switch between the display of micro-Tesla and mini-Gauss is available. Data hold (HOLD)、maximum (MAX) Hold function. Range display(20,200,2000). Low battery detector “ ”. Over load display “OL”. 4 Identifying Parts 1. Sensor position.
MG-300 5 Measurement Procedures Press to power on. Select for µT unit or for mG unit. Position the front (refer to Figure 1) of the meter to measure the electromagnetic waves. Try to change the measurement angle or position for obtaining the highest reading value (please refer to Figure 2 to 6).
Page 7
MG-300 Figure 1 indicate the correct measurement direction of the electromagnetic wave. Figure 2,3, 4, 5 and 6 indicate the incorrect measurement direction of the electromagnetic wave EN-4...
MG-300 7 Battery replacement WARNING If the symbol “ ” appears on the LCD, please replace the battery immediately Turn off the instrument. Remove the battery cover Replace the battery. Install the battery cover. 8 Safety Precaution For cleaning the instrument use a soft dry cloth.
MG-300 9 End of life Caution: this symbol indicates that equipment and its accessories shall be subject to a separate collection and correct disposal EN-7...
Page 12
EMR Shielding Solutions Inc. 399 Four Valley Drive, Unit 13, Vaughan, Ontario, L4K 5Y7, Canada E-mail: info@emrshieldingsolutions.com www.emrshieldingsolutions.com...