Related Manuals for LATNEX HM-400
Summary of Contents for LATNEX HM-400
- Page 1 Multifunction Meter 封页 Address: 399 Four Valley Drive Unit 13 Concord Ontario L4K 5Y8 Canada Canada Tel: 416-583-2005 USA Tel: 310-746-3686 封页内页 0 0 6 6 6...
- Page 2 Notice 1.Please make sure to refer to the installation instructions in the Operating Instructions to avoid damage caused by installation errors. 2.The product included the battery inside and cannot be replaced, do not disassemble or replace the battery by yourself. 3.
- Page 3 Function Icon Units Range Function Icon Units Range H:M:S Clock 100-2000 Wheel diameter -10℃—+70℃ Current RPM 0-20000 Air Temperature ℃/℉ 14℉—+158℉ Engine -20℃—+250℃ Maximum RPM 0-20000 ℃/℉ Temperature -4℉—+482℉ Maximum Engine -20℃—+250℃ 500-20000 Alert RPM ℃/℉ Temperature -4℉—+482℉ 1P1R 1P2R -20℃—+250℃...
-
Page 4: User Interface
User Interface User Operation All the information that captain is on one of these 3 screens. The user 1 Screen 1 Operation has the choice of staying on Screen 1 ,Screen 2 or Screen 3. Screen 1: Press "MEMU", the 3 main interfaces could be switched freely. ●... - Page 5 3 Screen 3 Operation Screen 3: ● Speed ●alert speed ● Battery voltage ●min battery voltage ● Engine Temperature ●air temperature ● Engine RPM (RPM) ●service distance Under the Screen 3 interface, press the “UP” or “DOWN” button can view more data information) ●Wheel diameter ●max speed ●min battery voltage...
- Page 6 2. Setup alert speed value (Defaults: 50KM/H) 4. Setup Alert Temperature Value (Defaults: 100℃ ) Press the “UP” or “DOWN” button until you get desired alert speed value , Press the “UP” or “DOWN” button until you get desired alert temperature value , release the button and finish your confirm.( Press the “SET”...
- Page 7 10. Setup turget Distance (Defaults: 0KM ) 12. Setup Engine RPM Alert (Defaults: 8000RPM ) Press the “UP” or “DOWN” button until you get desired target distance mileage Press the “UP” or “DOWN” button until you get desired alert rpm value , value , release the button and finish your confirm.( Press the “SET”...
- Page 8 b) Reset the Max Voltage Value d) Reset the Max Temp of Sensor Value Before After Before After Press UP/DOWN to reset Press UP/DOWN to reset c) Reset the Min Voltage value e) Reset the Max RPM Value Before After Before After Press UP/DOWN to reset...
- Page 9 j) Reset Oil Change Timing Value l) Reset Target Distance Value Before After Before After Press UP/DOWN to reset Press UP/DOWN to reset k) Rest Trip Distance Value m) Reset Service Distance Value Before After Before After Press UP/DOWN to reset Press UP/DOWN to reset - 15 - C.Timing up function (competition or used to measure a certain...
- Page 10 B.Alert Reminder C.Engine Type & RPM Mode Setting Engine Type(Stroke LCD Reminder LED Reminder Types of Alert Setting Range Firing Patterns Spark & Revolution and Cylinder) Method Method 4 stroke 2 Cylinder Over Speed Reminder 1P1R 0-300KM/H Alert Icon Flashes Red Flashes 1 spark per revolution 2 stroke 1Cylinder...
- Page 11 Specification & Parameter Temperature -20℃— +250℃ -20℃— +250℃ Alert Temperature Stroke Types 1P1R 1P2R 2P1R 3P1R 3P2R 4P1R 5P2R 6P1R 8P1R Measurement Setting Range -4℉— +482℉ -4℉— +482℉ Range Speed Temperature 0-350KM/H 0-300KM/H Temperature Alert Speed Measurement Measurement ＜±1.5℃ 0.1/1 Display Resolution Setting Range Range...
- Page 12 Product Dimension Reset CONNECTION HOLE Inside contain the battery, 1 - DC.POWER Keep installation location MENU away from the heat source. 2 - SPARK SENSOV 3 - TEMP SENSOR 4 - X 5 - SPEED SENSOR DOWN 44.2 56.6 M3 Brass nut Unit:mm 1/4 Brass nut 22.1...