Exhaust Filter; Removing/Installing The Bottom Plate - LG V-UP142NJP Owner's Manual

REPLACEMENT INSTRUCTIONS
WARNING
Electrical Shock and Personal Injury Hazard
• Unplug the vacuum cleaner before cleaning the unit. Failure to do so could result in
electrical shock or personal injury from the vacuum cleaner starting unexpectedly.

EXHAUST FILTER

The exhaust filter is washable HEPA filter.
(Optional: Non washable HEPA filter)
The exhaust filter must be rinsed when it becomes dirty.
Rotate to the left side to remove the filter cover. (Fig.A,B)
We advise you to rinse at least once a year.
After rinsing, allow the exhaust filter to dry in a shaded
location for 24 hours.
Never renstall the exhaust filter while it is wet.
Do not operate the vacuum cleaner without the filter in
place.
Replacement filter can be obtained from your dealer.

REMOVING/INSTALLING THE BOTTOM PLATE

Before replacing any parts, disconnect the vacuum from
the electrical outlet.
To remove the bottom plate, unscrew the bottom plate
first. Then pull the bottom plate away from the nozzle
housing. (Fig. C)
To install the bottom plate, hook the front end of bottom
plate into the slots on the front of nozzle. (Fig. D)
Press the bottom plate then tighten the screws.
A
A
Open
B
B
C
C
Removing Removing
D
D
15
Close
Exhaust
Filter
Filter Cover
Installing Installing