Related Manuals for Minka Group minkaAire Ninety-Nine F899L-ORB
Summary of Contents for Minka Group minkaAire Ninety-Nine F899L-ORB
- Page 5 REMOVING THE 24W LED ASSEMBLY FROM LIGHT KIT PLATE...
- Page 8 Light kit plate 24W LED assembly (preassembled)
- Page 16 REMOVING THE 24W LED ASSEMBLY FROM LIGHT KIT PLATE Step 1. Remove the screw from circular hole and loosen the other three screws from key holes approximately 1/4 turn. Keep the screw that removed aside for use later. Step 2. Turn the key holes of the 24W LED assembly from the three screws loosened previously and remove the 24W LED assembly from light kit plate.
- Page 17 Step 2. Place the key holes from the Light kit plate over the 2 screws previously loosened from the mounting ring, turn Light kit plate until it locks in place at the narrow section of the key holes. Secure by tightening the 2 screws previously loosened and the one previously removed.
- Page 18 Light kit plate...
Need help?
Do you have a question about the minkaAire Ninety-Nine F899L-ORB and is the answer not in the manual?
Questions and answers