Table of Contents
Advertisement
MAINTENANCE
CHECKING FOR BLOCKAGES
CHECK HANDHELD
Remove the handheld vacuum from the wand
and check all dust cup intake openings.
CHECK FLOOR NOZZLE
Detach the wand, then remove the Soft Roller.
Tilt the floor nozzle tube back and check
openings for blockages. Reinsert Soft Roller
until it clicks securely into place.
Remove any blockages or debris from the floor
nozzle debris intake (see Nozzle Maintenance
section).
12
AU sharkclean.com.au NZ sharkclean.co.nz
CHECK WAND
Detach the wand and check it for
blockages.
MAINTENANCE
NOZZLE MAINTENANCE
CLEANING THE SOFT ROLLER
NOTE: For best performance, keep the Soft Roller clean with regular maintenance.
Self-Cleaning Brushroll removes hair from
your brushroll continuously as you vacuum.
At times you may see small amounts of
hair around the brushroll – simply continue
vacuuming and the comb and suction will
remove the hair as you clean.
To remove the cover, use a coin to turn the
locks counterclockwise. Lift off the cover
and remove any debris or hair wrap. Check
the Debris Intake and clear away any dirt or
blockages.
To close the cover, push down until it clicks
into place, then turn the locks clockwise
until closed.
1
To remove the Soft Roller, slide the Eject Roller
button on the floor nozzle.
2
Tap loose debris off the Soft Roller. Use a dry
towel to wipe it clean, and to remove any debris
caught in the teeth behind the Soft Roller.
3
Hand-wash the Soft Roller as needed. Use only
water, and let it air-dry completely for at least
24 hours.
4
Reinsert the Soft Roller and press it in until it clicks
securely into place.
AU 02 8801 7666 NZ 0800 112 660
13
Advertisement
Table of Contents
