Hdr Video System - Sony BPU4000 Operation Manual

HDR Video System

When a 4K format camera system is selected, the dynamic
range of the camera can be enhanced to produce HDR video
output from SLOT1 and SLOT2 by setting HDR MODE to Live
HDR or CINEMA.
Set the HDR Look at the same time.
SLOT1 and SLOT2 can be configured separately, and can
output HDR/SDR or 4K/HD. (SLOT2 does not support HD
output.)
The HD output from SLOT3, SLOT4, and the CCU is always
SDR video.
Connection example
OFF ON
HD PROMPTER signal output
RET1 2 3 RET2 2 3
1 4 1 4 LIGHT
ON
OFF
PGM1 PGM2 PGM1 PGM2
LEVEL MIC LEVEL MIC
INCOM PROD INCOM PROD
REAR ON REAR ON
FRONT OFF ENG FRONT OFF ENG
INTERCOM 1 INTERCOM 2
DC OUT EARPHONE
REMOTE
TRACKER CRANE
PROMPTER
/GEN
LOCK
SDI 1
RET CTRL
FRONT MIC AES/EBU
LINE MIC LINE MIC
+48V +48V
TEST
OFF OFF
OUT
AUDIO IN
DC IN 10.5-17V
CH1 CH2 SDI 2
SDI
MONI
HDC4300
SDI-MONI
SDI Monitor/Prompter
(digital)
For details about assignment of BNC connectors, see "Relationship
between Connection Type and BNC Connector Assignment" (page 22).
HD TRUNK signal input
3G SDI/HD
SDI Monitor
3G/HD SDI OUT
REMOTE REFERENCE
IN OUT
SLOT3
3G/HD SDI OUT SLOT1 SDI OUT 1
SLOT4 HD SDI OUT SLOT2 SDI OUT 1
HD SDI OUT
HD SDI Monitor
HDR/SDR Output
4K Output
Return signal input
HDR Look
The HDR Look is a setting that determines the basic Look
(visual performance, attractiveness) of the HDR video.
This is a basic setting that determines how the image captured
by the camera will be displayed on the display as an HDR
image. You can select from the following three settings.
Live: Characteristics based on the traditional Look derived
from current SDR images. A powerful image with strong
contrast and high color density. Wide dynamic range with
substantial image brightness, capturing highlights without
overexposure.
Mild: Based on the Live setting but with an overall milder
image characteristic.
Natural: HLG original Look. Calm, gentle color density. The
actual sensitivity setting is reduced, but with better S/N
ratio. Natural can be selected only when the output signal
OETF setting is HLG.
Optical fiber cable
LINK-1 LINK-2 LINK-3 LINK-4
SDI SDI SDI SDI
OUT 1 OUT 3 OUT 5 OUT 7
SDI1 SDI2
SDI OUT 3 SDI OUT 4
SDI OUT 2 SDI OUT 5 SDI OUT 6 SDI OUT 7 SDI OUT 8
SDI OUT 2 SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6 SDI OUT 7 SDI OUT 8
SDI SDI SDI SDI
OUT 2 OUT 4 OUT 6 OUT 8
Prompter signal input
HD
PROMPTER IN
RETURN INPUT
SDI 1-4
Hub
20
HDR/SDR Output
4K/HD Output
CAMERA
CAMERA
CCU
CCU
Reference
signal input
Optical fiber cable
REFERENCE CAMERA
LAN
HDCU2000/2500 (CCU)
MSU-1000/1500
Master Setup Unit
RCP-3500/3501/1500/
1501
Remote Control Panel
BPU4000