SETTING UP THE APP 1. Download the app - LookCam Search and download LookCam on the App Store or Google Play..you can also scan the QR code below via QR scanning app for direct URL link. 2. Setup the NANO Insert a Micro SD card in the card slot 3 if you're planing on recording media directly on the NANO.
Page 5
To charge the battery, use the included USB cable to connect to a charger or any live USB port. Then connect to the NANO USB port 4. The indicator will stay on red while charging and go out once fully charged. 3.
Page 6
Back in the App, if it hasn't detect your camera yet, add one by taping the "+" plus sign, Add new online camera, then ADD BY LAN. You shoud see a new device listed.
Page 7
4. Setup remote connection Tap the gear icon from your camera device, then Cofig Wi-Fi, or WiFi Setting if on an Android. F14923PYFMW F14923PYFMW...
Page 8
Finaly, choose your local WiFi network and enter the password. If you dont know your local WiFi password please check with your internet provider. Once connected you will be able to watch and control video recording live from the app remotely.
Page 9
Tap on the camera device on the list, it may take 30 seconds for video to come up. F14923PYFMW F14923PYFMW...
Product Specs Resolution Ratio 1080P/720P/640P/320P Video Format Frame Number Visual Angle 150 /90 degree Motion Detection Camera Straight line 6 meters Shooting Minimal Illumination 1LUX Video Duration Over 1 Hours Compressed Format H.264 Recording Range 5㎡ Consumption 380MA/3.7V Storage Temperature -20-80 degree centigrade Operating Temperature -10-60 degree centigrade...
Need help?
Do you have a question about the NANO-4K and is the answer not in the manual?
Questions and answers