Noraxon myoMOTION System Quick Start Manual page 2

myoMOTION Quick Start Guide
Welcome from Noraxon
Congratulations on acquiring your new myoMOTION System!
This guide will provide you with step by step instructions on how to install your new hardware and
software, adjust device settings, and record your first data set.
This is not meant to be a complete manual, but a guide to help you get started with your system. For more detailed
instructions on operating the myoMOTION System and its features please refer to the complete myoMOTION Users Manual
(P-6808), also included with your system.
1 System Unboxing
The myoMOTION System is packed within a reinforced padded box for storage and protection during transport. Upon
arrival, carefully remove all contents and verify the following components are present. Contents will depend on purchased
package.
Figure 1: myoMOTION Research Receiver
(Part# 680)
Figure 4: MyoMOTION Clinical Receiver
(Part# 616)
Figure 7: USB A to mini-B Cable (Part#
CBL17)
(Rev B)
Figure 2: myoMOTION Clinical Receiver
(Part# 684)
Figure 5: Sensor Charging Station (Part#
613)
Additional items that may be included with your myoMOTION
System include:
myoMOTION Strap System (Part# 874X or 610X)

Double side tape samples (part #610C)

Sensor Body Segment Label Set (part #610A)

myoMOTION Hardware User Manual (part #680A)

Figure 3: myoMOTION Research
Sensor (Part# 610)
Figure 6: Charging Station Power
(Part# PSU1)
2