Advertisement
LED FIBREGLASS POOL/SPA LIGHT INTRODUCTION
Britestream Slim90 has been speci cally designed for easy installation into breglass pools/
spas. Features include the following:
• Flush mounted with a minimal 14mm projection into pool.
• Super bright LED's.
• Life span of over 70,000 hours.
• Operates on only 10% of the electrical power of an equivalent halogen light.
Available in multicoloured RGB, blue and white models.
• Ensure all pool/spa lights are installed by a suitably qualified persons (e.g. registered pool builder and/
or qualified electrician), in accordance with AS/NZS 3000:2007 standards.
• This pool/spa light is supplied with a 20m power cable and should not be modified. Cutting an
underwater section of power cable will void the warranty unless done so in conjunction with the
underwater light replacement kit.
• The pool/spa light must be installed not more than 600mm below top of coping, to allow for removal
from pool/spa for servicing.
• The recommended length of power cable that is stored within the light niche is 1m. This enables easy
access without the need for entering the pool/spa water.
• Ensure the light is submerged in water before switching on, to avoid overheating.
• Surrounding area has to be clear and unencumbered to allow for adequate space to service the light.
• When switched off, the light should be left to cool for two minutes before switching on again.
LED FIBREGLASS POOL/SPA LIGHT SPECIFICATIONS
Note: Speci cation size in Millimeters (mm).
Waterco Britestream LED Fibreglass Niche Pool Lights
CAUTION
14
183
2
144
I
Advertisement
