Advertisement
Unpack all parts from the carton to ensure there are no missing or damaged parts. If any parts are missing or damaged,
do not attempt to assemble or use the product. Please contact customer service for replacement.
Box Contents
Fountain Top
Base
Iron Rack
Candle Holder
Pump/Lamp Chain
Transformer
Finger Lamps
Large Bolts
Washers
Small Bolts
Top Screw
Glass Cup
Pump Cover
Mesh Screen
Tools Required for Assembly
Screwdriver (not included)
Replacement Parts
Finger Lamp Bulb:
JC type halogen bulb, 12 volts,
10 watts maximum
Submersible Lamp Bulb:
MR-11 type halogen bulb, 12 volts,
10 watts maximum
Pump: # PT-750(O).
Transformer: # YFOU1204000A
Contact Customer Service for missing parts.
If the fountain top, steel rack or base are
missing or damaged, the unit must be returned
to or exchanged at the retailer.
ITM./ART. 105853
Florentine Fountain
Questions, Problems, Missing Parts?
Before returning to retailer, please call customer service at (866) 728-6187 from
9am – 5pm (EST), Mon – Fri or e-mail customerservice@srg-usa.com.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
1 pc
1 pc
1 pc
2 pcs
1 set
1 pc
2 pcs
6 pcs
4 pcs
4 pcs
1 pc
2 pcs
1pc
1pc
NOTE: Diagram for illustrative purposes only and not to scale.
Advertisement
Table of Contents
Related Manuals for Stone Art 105853
Summary of Contents for Stone Art 105853
- Page 1 ITM./ART. 105853 Florentine Fountain Questions, Problems, Missing Parts? Before returning to retailer, please call customer service at (866) 728-6187 from 9am – 5pm (EST), Mon – Fri or e-mail customerservice@srg-usa.com. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY. Unpack all parts from the carton to ensure there are no missing or damaged parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be practiced including the following: 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 2. Read and follow all instructions that are on the product or provided with the product. 3. For a cord-connected or direct plug-in power unit, do not use an extension cord. 4.
- Page 3 ASSEMBLY INSTRUCTIONS Estimated assembly time: Approximately 30 minutes Assemble the fountain in the location you intend to use it. Do not move with water in the fountain. Place the fountain base on a flat, level surface for the assembly and location of the fountain. Place the pump into the pump housing in base.
- Page 4 CARE AND MAINTENANCE Keep the water clean and clean the fountain periodically to prevent mineral deposits and contamination which may clog the pump. Use a pre-filter on your pump if available. Regular cleaning of the pump will be necessary depending upon the environment in which it is operated. Clean the pump when it is visibly soiled or when a noticeable decrease in performance is detected.
Need help?
Do you have a question about the 105853 and is the answer not in the manual?
Questions and answers