LG DP8821 Owner's Manual page 39

Initial Settings (continued)
Password (Security Code)
You can enter or change password.
1. Select Password on the LOCK menu then press B.
2. Follow step 2 as shown left (Rating). "Change" or "New" is
highlighted.
3. Enter the new 4-digit code, then press ENTER. Input it again to veri-
fy.
4. Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using the following
steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number "210499" and the security code is cleared.
3. Enter a new code as described above.
DVD
Area Code
Enter the code of the area whose standards were used to rate the DVD
video disc, based on the list in the reference chapter.
1. Select "Area Code" on the LOCK menu then press B.
2. Follow step 2 as shown left (Rating).
3. Select the first character using v / V buttons.
4. Press ENTER and select the second character using v / V buttons.
5. Press ENTER to confirm your area code selection.
39