Table of Contents
Advertisement
Identification of Controls (continued)
Insert the battery (Lithium battery)
NOTES
• Do not expose the remote control sensor to bright light.
• Do not place obstacles between the remote control sensor and the
remote control.
V V
Replacing the button-type battery
The battery normally lasts for about a year. Replace the battery if the
remote control fails to operate the unit when used within the operation
range.
Button-type battery (Lithium battery)
1. Pinch the battery holder clip together then pull the tab to remove the
battery holder.
2. Insert the battery with the + facing in the same direction as the + on
the battery holder.
3. Replace the battery holder with battery into the remote control unit
making sure that it is fully inserted.
• Replace remote control unit battery with 3V micro lithium cells such as
CR. 2025 or its equivalent.
• Dispose of battery safety in accordance with local laws. Do not dispose
of in fire.
Warning : The battery used in this device may present a fire or chemi-
cal burn hazard if mistreated. Do not recharge, disassemble, incinerate,
or heat above 100 °C (212 °F).
Replace the battery with Matsushita Elec. Ind. Co., Ltd. (Panasonic),
part no. CR. 2025 only.
Use of another battery may present a risk of fire or explosion. Dispose
of used batteries. Keep batteries away from children. Do not disassem-
ble or dispose of in fire.
12
Advertisement
Table of Contents
