Table of Contents
Advertisement
Power Connections (continued)
This DVD player and its automotive adapter are designed for use in vehicles that have 12-24 volt, negative ground electrical
Automotive
systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the DC power system
Adapter
cannot be used.
Follow steps 1 to 2 to connect.
When disconnecting, reverse the order.
Caution
• To prevent electrical shock and possible damage to your DVD player or vehicle,
always unplug the automotive adapter from the cigarette lighter socket before
you remove the plug from your DVD player.
• A 4 amp. 250V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter from the
car's cigarette lighter socket.
• Do not operate your DVD player when the car battery is discharged. Peak current
from the car generator may cause the DC fuse to blow.
• If the vehicle's supply voltage drops below approximately 10 volts, your DVD
player may not work properly.
• Do not leave your DVD player in a place where the temperature exceeds 70°C
(158°F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.
1
Cigarette lighter socket
Automotive adapter
• This automotive adapter operates on DC 12-24V.
• MODEL NO. : DP-CA90
• Manufactured by WANLIDA Digital Technology Co., Ltd.
• Contact an electrical parts distributor for assistance in selecting
a suitable automotive adapter.
14
2
Advertisement
Table of Contents
