Table of Contents
Advertisement
Initial Settings (continued)
DVD
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz signals,
select 48 kHz. When this choice is made, this unit automatically converts
any 96 kHz signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96 kHz signals, select
96 kHz. When this choice is made, this unit passes each type of signal
through without any further processing.
Check the documentation for your amplifier to verify its capabilities.
DVD
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's soundtrack in the most
accurate and realistic presentation possible, thanks to digital audio tech-
nology. However, you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds and the quietest
ones). This allows you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On only when a multi-channel karaoke DVD is playing. The
karaoke channels on the disc mix into normal stereo sound.
OTHERS
The PBC, Auto Play, B.L.E. and DivX(R) VOD settings can
be changed.
DivX
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
Auto Play
You can set up the DVD Player so a DVD disc automatically starts play-
ing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search for title that
has the longest playback time and then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
NOTE
The Auto Play function may not work for some DVDs.
36
OTHERS
PBC
On
Auto Play
Off
DivX(R) VOD
Select
Move
VCD
DVD
Select
Advertisement
Table of Contents
