Advertisement
General Specifications
Transducer length
Weight
Transducer diameter
Minimum bending radius
Cable length from
transducer to BNC
Temperature, operating
Temperature, non-operating
Relative Humidity, operating
Altitude, operating
Altitude, storage
Ingress protection
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for one
year from the date of purchase. This warranty does not cover fuses, disposable
batteries, or damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to extend
any other warranty on Fluke's behalf. To obtain service during the warranty period,
contact your nearest Fluke authorized service center to obtain return authorization
information, then send the product to that Service Center with a description of the
problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
11/99
TF-II
61 cm (24 in)
153 g
7.5 mm (0.3 in)
38 mm (1.5 in)
2.5 m (98.4 in)
-20 °C to +70 °C (-4 °F to +158 °F)
Temperature of conductor under test
shall not exceed 80 °C (176 °F)
-40°C to + 80 °C (-40 °F to +176 °F)
15 % to 85 %, noncondensing
2 000 m (6 500 ft); for use up to 4000 m
derate to 300 V CAT IV, 600 V CAT III,
1000 V CAT II.
12 km (40 000 ft)
IP40
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
i430-Flexi-
TF-II-48
122 cm (48 in)
200 g
Advertisement
