Alarms - SAES NEG POWER User Manual

4.11.

Alarms

If there are problems during the control of NEG pumps, the output status is ALARM and the output
start / stop button is disabled. The status is ALARM until the problem is solved.
When an alarm occurs, a red bar appears on the screen with detailed information of the problem.
Touch the red bar to acknowledge the alarm.
The bar stays even if the problem has been solved until it is acknowledged by touch.
In this page by pressing the Status value (highlighted with blue circle in the previous picture) a list
of all alarms and their current status is shown: the active alarms are highlighted in red.
th
M.HIST.0101.23 R2 Page 21 of 36 January, 26 2021